Mercedes-Benz Zetros 2020, Руководство по эксплуатации

Страница: 191 / 212

i Observe the following notes on the rear
towing device.
R
Do not use the towing device to tow or
recover vehicles.
R
Do not exceed the maximum pulling angle
of 15° in relation to the vehicle's longitu-
dinal axis.
R
Observe the notes on the towing device
identification plate.
R
Do not load the towing device with more
than the weight given below. Otherwise,
the cross member could be damaged.
Maximum load of the rear towing device:
Vehicle
version
2 axles 3 axles
Semi-
trailer
truck
20 t 25 t
Platform
vehicle/
tipper
25 t 50 t
Example: cross member with towing device
X Unhook catch
;
on coupling pin
:
.
X
Remove coupling pin
:
.
X
Attach the towbar.
X Push coupling pin
:
down through the eye-
let of the towing bar.
X
Hook catch
;
onto coupling pin
:
again.
Rear recovery and lashing eyelets
You can use the recovery and rear lashing eye-
lets
:
and straps and chains with suitable fix-
tures for lifting, recovering and lashing the
vehicle. Lifting the vehicle from the front and
rear simultaneously is not permitted. For per-
missible loads and all further information, see
the separate lashing instructions.
Tow-starting the vehicle
Important safety notes
X
Turn the key to the drive position in the igni-
tion lock.
Vehicles with manual transmission
X Depress and hold down the clutch pedal.
X Shift to 4th or 5th gear.
X
Tow-start the vehicle.
Do not exceed a towing speed of 20 km/h.
X When the maximum permitted towing speed
is reached, release the clutch pedal and
depress the accelerator pedal.
! If the permitted engine speed is exceeded,
the warning buzzer sounds. Shift to a higher
pulling-away gear or reduce the tow-starting
speed. Do not exceed the permitted engine
speed. Otherwise, you could damage the
engine.
X When the engine starts, depress the clutch
and shift the transmission into neutral.
Jump-starting, tow-starting and towing away
189
Breakdown assistance
Z