2515 Bypass Rd. Flemingsburg, KY 41041
606-845-7439
Instructions for Installation and Care of CF Moto U-Force 1000
Full Polycarbonate Rear Window
CF-U-1000-RW02 / 50-40064
NOTICE: Please check contents of package for any damage and make sure all parts fit correctly and you
are happy with the product before removing protective film. Once the film is removed you cannot return
the product for a full refund.
1.
Check over the parts included in the cartons with the parts list shown below:
2" Stainless Bolts
8 each
1 1/4” Stainless Bolts
6 each
5/8” White Nylon Spacers
16 each
Metal Brackets
2 each
White Nylon Washers
4 each
Lock Nuts
12 each
Thumb Nuts
2 each
Large Polycarbonate Pieces
6 each
54” Adhesive Rubber Padding ½” Wide
1 each
22” Adhesive Rubber Padding ½” Wide
2 each
54” Adhesive Rubber Padding 1½” Wide
1 each
Rear Window
1 each
If any parts are damaged or missing please contact customer service at (606) 845-7439.
2.
Start by pulling it out of the box; find a clean area to lay it down and install the hardware.
3.
Begin attaching the two bottom brackets before you put the window on the U-Force. These brackets are
made up from several different parts that must be put together first. Below is a picture of the parts
needed to make the bracket.
