Meler PS200, Инструкция по эксплуатации, Страница: 66 / 100

FOCKE MELER GLUING SOLUTIONS, S.A.
4-32
MELTER OPERATION
Place in the rod with the air supply connection. To do so, place the rod and
turn it 1/2 turn to the left or right (1). Now, the rod will down a level and will
be in the protection zone. To introduce the rod completly, turn it 1/4 turn to the
right and push down (2).
The system must be connected to the air supply and the valve must be open.
It is recommended to make sure that air comes out of the tube by pressing
the ‘Air in’ button on the panel. ANY MALFUNCTION IN THE AIR SUPPLY MAY
DAMAGE THE DRUM AND PREVENT REMOVING THE PLATEN.
Push the amber button ‘Platen up’ and it starts moving up. Automatically it
is activated the drum aeration input. When the platen reaches the highest
position the amber light ‘Platen up’ goes off while the amber light ‘Platen
down’ blinks waiting a new order to move down the platen.
Remove the drum retainer and take out the empty drum (1).
If a new drum is not going to be placed immediately, put the dripping tray
below the platen to collect any adhesive that might drip out (2). Remove the
rod and the air tube and replace the rod in the purge hole.
When inserting the dripping tray, a detection system indicates its presence to
the machine, preventing the platen from being moved down while the tray is
underneath it.
1/2 1/2
1 1
2 2
1/4 1/4
1 1
2 2