Meler PS200 Скачать руководство пользователя страница 47

Страница: 47 / 100

4-13

MA-5066-ENG

PS200 DRUM MELTER MANUAL

MELTER OPERATION

Setting the clock

PS200 drum melters are equipped with a weekly programmable system

controlling equipment connection and disconnection and activating and

deactivating the standby function.

Before programming these functions, it is necessary to introduce into the

control unit data corresponding to the day and hour used to execute these

programs.

Programming the current day and hour

1. Press the button with the clock symbol.

A ‘0’ will appear on the display, indicating the program for current day

and hour information.

2. Press the button with the clock symbol once again.

On the left display, you will see the time with a dot, indicating that this

is the value that may be modified, while the minutes appear on the

second display.

3. Use the up-down arrow to select the desired value.

4. Press the button with the clock symbol once again.

Now the dot will appear on the right display.

5. Use the up-down arrow to select the desired value.

6. Press the button with the clock symbol once again.

A number appears, indicating the day of the week (1- Monday / 7-

Sunday).

7. Use the up-down arrow to select the desired value.

8. Press the button with the clock symbol once again.

The ‘0’ program appears once again.

9. Pressing either the left or the right arrow button will exit this program

and return to the platen temperature display.

Содержание PS200





































































































Результаты поиска

Содержание PS200

Отзывы:

Meler PS200, Инструкция по эксплуатации, Страница: 47 / 100

Результаты поиска

Содержание PS200

Отзывы: