Meler PS200 Скачать руководство пользователя страница 50

Страница: 50 / 100

FOCKE MELER GLUING SOLUTIONS, S.A.

4-16

MELTER OPERATION

4. Press the button with the clock symbol once again.

Two times will appear, one in each display. The left display shows the

start time, while the right display shows the finish time.

5. The blinking dot next to the start time indicates that this is the time

that may be modified.

Use the up-down arrow to select the desired value.

6. Press the button with the clock symbol once again.

The dot changes to the finish time.

7. Use the up-down arrow to select the desired value.

8. Press the button with the clock symbol once again.

The selected program appears once again. You may use the up-down

arrow to select other programs.

9. Pressing either the left or the right arrow button will exit this program

and return to the platen temperature display.

The green LED next to the ‘standby’ button will remain blinking as long as

there is an equipment standby function activation time programmed for the

current day.

Disabling the equipment standby function programming

It is possible to disable the equipment standby function programming without

canceling the daily programming. This way the programmed data is saved, but

the programming will have no effect on the equipment.

1. Press the button with the clock symbol.

A ‘0’ will appear on the display, indicating the program for current day

and hour information.

2. Press the standby function button.

A ‘1’ will appear, indicating the first day in the standby function

programming.

3. Use the up-down arrow to go past the selection for the last day of the

week (7).

The message ‘ON/OFF’ will appear on the display, depending on the

current status.

Содержание PS200





































































































Результаты поиска

Содержание PS200

Отзывы:

Meler PS200, Инструкция по эксплуатации, Страница: 50 / 100

Результаты поиска

Содержание PS200

Отзывы: