Meinberg M900 Скачать руководство пользователя страница 56 | Manualshive

Страница: 56 / 170

Meinberg M900 Скачать руководство пользователя страница 56

Menu: Global Configuration

In this sub menu you can change the global network settings like host and domain

name, nameserver and syslog server. Further name- or syslog servers can be set up via
HTTP interface or CLI Setup. In the nameserver and syslog server fields you have to
enter an Ipv4 address.

All information written to the LANTIME SYSLOG (/var/log/messages) can be
forwarded to one or two remote SYSLOG servers. The SYSLOG daemon of this
remote SYSLOG needs to be configured to allow remote systems to create entries. A
Linux SYSLOG daemon can be told to do so by using the command “syslogd –r”
when starting the daemon.

If you enter nothing in the SYSLOG server fields or specify 0 .0.0.0 as the SYSLOG
servers addresses, the remote SYSLOG service is not used on your LANTIME.

Please be aware of the fact that all SYSLOG entries of the timeserver are stored in
„/var/log/messages“ and will be deleted when you power off or reboot the timeserver.
A daily CRON job is checking for the size of the LANTIME SYSLOG and deletes it
automatically if the log size is exceeding a certain limit.

By specifying one or two remote SYSLOG servers, you can preserve the SYSLOG
information even when you need to reboot or switch off the LANTIME.

The submenu „Network LED“ will monitor the network ports, which will be

checked continuously if the network port is „LINKED UP“. If one of these ports has
no link up, the network LED on the front panel will change to red. An „L“ for „LED“
indicates if the port is checked. Please navigate through the list of ports with the
LEFT/RIGHT buttons and change the setting with the UP/DOWN buttons.

56

Check LAN Port:
ETH0:L ETH1:
ETH2: ETH3:
PTP0:

->Global Cfg.<-

Interfaces

Services

> Device Names <
Network LED

> Hostname <

Domainname

Nameserver
Syslogserver

«
...
54
55
56
57
58
...
»

Содержание M900











































































































































































Отзывы:

Нет отзывов