Meech TakClean, Руководство по эксплуатации

Страница: 11 / 32

11
System Installation – Electrical
IMPORTANT
Installation of the TakClean system should only be completed by those with suitable qualifications.
The TakClean system requires two electrical connections:
1. 110/240V at 50/60Hz = to power the TakClean Control Box
2. 110/240V at 50/60Hz = to power the Meech ionisation system
Connecting the Remote On/Off Signal From the Line
Connect a normally open (NO) signal from the line in the TakClean control box into pins 1 and 6 (see circuit diagram) as shown in
the image below.
This can be fed into the pneumatic control box via the Auxiliary cable gland.
Connecting the Active Ionisation Equipment
Before making any connections ensure the unit is disconnected from the mains.
The Meech Model A905 ionising power supply has 4 ionising appliance connection ports (2 on each side). Remove the lid of the
905 by unscrewing the three retaining screws, select the required number of ports, one per ionising bar, and remove the
necessary grommets from the ports.