Meech TakClean, Руководство по эксплуатации

Страница: 14 / 32

14
Operating the System
Before Use
Before using the TakClean system it is important that you have read and fully understand this manual.
CAUTION
Remove cable ties from pneumatic cylinders before use.
IMPORTANT
Testing of the system is recommended before it is used for full production.
General Operation
Follow these steps to operate the TakClean system:
1. With the TakClean system hinged open, visually check that the web is running centrally through the TakClean system.
2. Close the top half of the TakClean system and latch shut.
3. If open, close the adhesive roll carriages.
4. Engage the adhesive rolls into contact with the TransTak elastomer rollers. Depending on your selected electrical connection,
this can be achieved via a manual operation using the push button on the front of the TakClean control box, or via a remote
signal if you have wired the system for remote operation.
5. The TakClean system is now ready to use. It is recommended that you monitor the system when it is first tested. If any
problems are highlighted, please stop using the TakClean system and contact Meech International directly or your local Meech
distributor.
6. When the TakClean system is not being used, it is important that the adhesive rolls are NOT engaged with the TransTak
elastomer rollers.