Meech TakClean, Руководство по эксплуатации

Страница: 12 / 32

12
Connect the ionising bars by removing the lock washer and nut from the swivel connector of the appliance.
Push the connector through a port in the power supply adjacent to the high voltage terminal.
Then refit both the lock washer and nut to the ionising bar. Ensure that the nut is fully tightened.
Connect the cable eyelet of the ionising bar to the high voltage stud of the 905 using the screw provided. Ensure that the nut of
the ionising bar connector is fully tightened.