Meech TakClean, Руководство по эксплуатации

Страница: 15 / 32

15
Maintenance – Adhesive Rolls
IMPORTANT
Always make safe the electrical and compressed air supplies before undertaking any maintenance work on the TakClean system.
IMPORTANT
Maintenance should only be completed on the TakClean system by those with suitable qualifications.
General Guidelines
The cleaning performance of the TakClean system can be maximised by regular monitoring of the adhesive roll condition.
The greater the level of contamination that is removed from the web, the more frequently the adhesive roll will need to be
refreshed. There is no rule for the frequency of refreshing the adhesive roll, it is governed by the contamination level on the web.
The adhesive roll has 70 sections.
IMPORTANT
Visually check the condition of your adhesive rolls regularly; inspection is recommended every time a new roll of material is
processed. If the roll appears heavily contaminated, or has started to darken in colour, you should refresh the roll, as it will have
lost its tack level and will not be operating with its peak adhesion level.
CAUTION
Do not leave the adhesive roll carriage fully pulled out for prolonged periods.
Refreshing the Adhesive Roll
The adhesive roll can be refreshed by following these steps:
1. Make sure the adhesive rolls are NOT engaged with the TransTak rollers.
2. Press the adhesive roll catch next to the handle on the front of the TakClean system and pull the adhesive roll carriage
towards you.
3. Locate the leading edge of the adhesive material and peal off 1 layer of the roll to the next perforation line.
4. Tear off the contaminated section of the adhesive roll at the perforation point.
5. Lay the new leading edge back onto the roll so that it is stuck in position.
6. Push the adhesive roll carriage back into the TakClean system body.
7. The adhesive roll is now refreshed and the TakClean system can be used.