Meech TakClean, Руководство по эксплуатации

Страница: 16 / 32

16
Replacing the Adhesive Roll
After all 70 sections of adhesive material on a roll have been used; the roll will need to be replaced with a new roll of material.
The adhesive roll can be replaced by following these steps:
1. Make sure the adhesive rolls are NOT engaged with the TransTak rollers.
2. Press the adhesive roll catch next to the handle on the front of the TakClean system and pull the adhesive roll carriage towards
you.
3. Pull the outboard end of the adhesive roll towards you. Be sure to steady the adhesive roll carriage with one hand as you do
this.
4. Repeat this action for the inboard end of the adhesive roll.
5. Remove the core chuck assembly from both ends of the adhesive roll. A 5mm Allen key is required to loosen the 2 bolts visible
on each core chuck assembly. If there is any resistance when trying to remove the core chuck assembly, loosen the bolts
further. Do not try to force the core chuck assembly from the roller.