Meech TakClean, Руководство по эксплуатации

Страница: 7 / 32

7
Unpacking the System
IMPORTANT
When removing the TakClean system from the packaging, DO NOT USE THE HANDLES ON THE FRONT OF THE SYSTEM.
The handles are only to be used to pull out the adhesive rolls and are not designed to take the weight of the system.
CAUTION
Observe correct manual handling procedures when removing the system from the packaging. It is likely that the system will
exceed the recommended manual handling limit.
The TakClean will be delivered in a custom sized, thick walled cardboard box that is fixed on a wooden pallet.
On receipt of the system, check the packaging for signs of shipping damage. If found, any damage should immediately be
reported to the shipping company, the supplier of the system and Meech directly.
Inside the packing, the system and components will be positioned as follows:
Ionisation
Power Supply
System Manual
Control Box System
Check the system for signs of damage. If found, any damage should immediately be reported to the supplier of the system and
Meech directly.
Before installation of the system, it is recommended that you clean it to remove any potential packing contamination.