Meech AHU-CL1, Руководство по эксплуатации

Страница: 62 / 102

AHU-CL1 Manual
Page 62 of 102
Clean Pin Alert LED
The local LED illuminates constant green to indicate that the bar is on and working correctly. Red
flashing LED shows that bar is dirty and needs cleaning. Solid red illumination indicates a fault with the
high voltage output.
•
Green constant – OK
•
Green flashing – BarMaster remote programmer connected
•
Red flashing - Cleaning required
•
Red constant – Fault
Recommended (pre-set) settings
•
Output Voltage Default setting: 7.5kV
o
Adjustable with Barmaster from +/- 3kV to +/-7.5kV Pulsed DC
•
Output Frequency Default setting: 20Hz
o
Adjustable with Barmaster from 1Hz to 20Hz
•
Output Balance Default setting: 54:46 Pos:Neg (%)
o
Adjustable with Barmaster from 80:20 to 20:80 Pos:Neg (%)
Health and Safety
Emission of Ozone
Considerably below international standard of 0.1ppm.
Shockless Emitters
The Titanium emitter pins on the 924IPS are resistively coupled to the high voltage supply. This avoids
sparking and operator shocks.