Meech AHU-CL1, Руководство по эксплуатации

Страница: 73 / 102

AHU-CL1 Manual
Page 73 of 102
Trouble shooting
AHU-CL1 and VacClean Head
Issue Possible Reason Corrective Action
Filter blocked Alarm
Filter needs to be emptied or
replaced Empty or Replace the filter bag
Filter door is open Make sure filter door is closed
AHU is not located far enough back
and clamps are not latched closed Make sure AHU is located
correctly by latching front clamps
closed
VacClean has become displaced
from correct mounting Check mounting and VacClean
connection to rear ducting
manifold at the rear of the AHU
Finger covers on the VacClean
heads have worn and no longer
function correctly Replace the finger covers, see
spares and wear parts for part
number that requires ordering
One or both pumps are broken/not
functioning Check voltage to Pump and
replace if damaged. Part number
for pump can be found in spares
and wear parts
AHU will not run in
Remote mode
Filter door not closed with filter
inside Place filter on the filter tray and
close the door fully, locking it in
place
AHU not located in the correct
location Make sure the AHU is pushed as
far into the machine as required
with the two clamps on the font
latched closed
Inductive sensor malfunction Place a metal object (must be
magnetic) in front of both of the
inductive sensors at the same
time and see if they illuminate. If
they do not illuminate, they are
faulty and should be replaced