Meech AHU-CL1, Руководство по эксплуатации

Страница: 38 / 102

AHU-CL1 Manual
Page 38 of 102
Secure the AHU-CL1 in place with the 4 washers and M5 Socket Head Cap screws provided, tightened to
2.5N, 2 on each Carrier.
Remove the rear handle from the back position on the vacuum compartment and place it next to the
handle at the front of the compartment. This handle is just used for fitting of the AHU-CL1 and needs to
be moved to stop a collision with the VacClean Head
Ensure the holes left behind where the handle was are blanked with the fixings provided in the front
holes.
Figure 58 - Position of M5 Bolts to secure AHU-CL1
Figure 59 - Moving rear mounting handle