Meech AHU-CL1, Руководство по эксплуатации

Страница: 50 / 102

AHU-CL1 Manual
Page
50
of
102
Touch Screen Control Interface
The AHU-CL1 has an integrated touch screen control interface which gives the user the complete control
over the AHU-CL1.
The touchscreen has one main home screen that can be used to set and control the system, there is also
access to further information screens that can be accessed without a password.
1. Vacuum/Pressure Level indicator
The Vacuum/Pressure Level indicator shows the value achieved by the AHU-CL1.
The arrow points to the ‘target’ pressure level and the figure and graph represent the actual
Vacuum/Pressure achieved.
2. Vacuum/Pressure target set pressure value and setting buttons
The ‘+’ and ‘-‘ buttons are used to set the Vacuum/Pressure level. The target value is shown in kPa
just above the buttons. This is also represented by the arrow shown in the Vacuum/Pressure level
indicator (1).
3. System status indicator
The System status indicator displays if the system is running or stopped. This status can also be
accessed via the signal cable – see wiring diagram for details.
1
4
3
7
6
8
5
9
2
Figure 76 - Main Home page on Touch Screen