Meech AHU-CL1, Руководство по эксплуатации

Страница: 59 / 102

AHU-CL1 Manual
Page
59
of
102
Turbulent Air
The VacClean pulls air in between the face plate of the VacClean and the web material requiring
cleaning. This creates a turbulence that loosens the contamination on the web and allows it to be
vacuumed off the web.
Installation
The installation is covered previously in the beginning of the manual in the installation pages.
VacClean specific Installation
The general VacClean installation is covered at the start of the manual, however important areas to
check when installing are:
•
Face Plate Level
•
Brush height
•
Multi-web size fingers
•
Bars
All components of the VacClean are set before shipping but rough handling can cause damage and
movement of some components, these should be visually checked to ensure correct cleaning of the
web.
Inspecting face plate level
The face plate level can be easily visually checked that it has not come loose or “popped up”. The face
plate mounts on the VacClean through tensioning screws which can be released if the face plate needs
to be levelled. The VacClean’s use of vacuum pressure means there can be a large tolerance of 2mm
Face Plate
Web Material
Brush
Turbulent Air
Figure 88 - Removal of Contamination through Turbulent air