Medias Mediatrix 1204, Справочное руководство

Страница: 97 / 390

SIP Authentication Reference Manual (SIP Version)
Mediatrix 1204 71
SIP Authentication
The Authentication sub-page of the SIP page allows you to configure the user agent authentication parameters
of the Mediatrix 1204.
Authentication information allows you to add some level of security to the Mediatrix 1204 lines by setting user
names and passwords.
You can also set these parameters via SNMP, as described in “Authentication” on page 222 .
X
To set the SIP security parameters:
1. In the web interface, click the SIP link, then the Authentication sub-link.
Figure 33: SIP – Authentication Web Page
2. In the User Agent Group Authentication section, select whether or not the current user agent
credentials are valid for any realm in the corresponding Validate Realm drop-down menu.
3. Enter up to five realms for each user agent in the Realm column.
When authentication information is required from users, the realm identifies who requested it.
4. Enter a string that uniquely identifies this user agent in the realm in the Username column.
5. Enter a user password in the Password column.
6. Click Submit if you do not need to set other parameters.
Standards Supported Basic and Digest authentication as per RFC 3261
Table 44: Realm Authentication Parameters
Parameter Description
Disable The current user agent credentials are valid for any realm. The corresponding
Realm field is read-only and cannot be modified.
Enable The user agent credentials are used only for a specific realm set in the
corresponding
Realm field.
3 2 4 5