Medias Mediatrix 1204, Справочное руководство

Страница: 248 / 390

Chapter 18 - SIP Protocol Features Authentication
222 Mediatrix 1204
Authentication
Authentication information allows you to add some level of security to the Mediatrix 1204 lines by setting user
names and passwords.
You can also set these parameters via the web interface, as described in “SIP Authentication” on page 71 .
You can define up to five user names and five passwords for each group of the Mediatrix 1204. A group can
thus register with five different realms. Keep in mind that:
Rows 1-5 of the table where you define the user names and passwords are reserved for group
1.
Rows 6-10 of the table where you define the user names and passwords are reserved for group
2.
etc.
For instance, to enter a user name for the second group, you must do so in the sixth row of the table. To enter
a user name for the third group, you must do so in the eleventh row of the table, and so on.
The current version of the Mediatrix 1204 supports only one group that contains all the FXO lines. See “Line
Grouping” on page 196 for more details.
X
To set group-specific authentication:
1. In the sipUAGroupConfigTable group, set the following information:
Authentication Request Protection
When the Mediatrix 1204 sends an authentication request, you can configure it so that it tries to apply the
authentication with integrity protection when this feature is supported by the SIP server.
X
To set the quality of protection:
1. In the sipInteropMIB , specify the quality of protection the SIP User Agent should apply to its
authentication request in the sipInteropAuthenticationQop variable.
The following values are supported:
Standards Supported Basic and Digest authentication as per RFC 3261
Table 140: Group-Specific Authentication
Variable Description
sipUAGroupAuthRealm When authentication informations are required from users, the realm
identifies who requested the information.
sipUAGroupAuth
Username A string that uniquely identifies this endpoint in the realm, used for
authentication purposes. The user name always maps to a password.
sipUAGroupAuth
Password User password.
sipUAGroupAuthValidat
eRealm When set to disable, the current group credentials are valid for any
realm. When set to enable, the group credentials are used only for a
specific realm set in the sipUAGroupAuthRealm variable.
Table 141: Quality of Protection
Parameter Description
auth The SIP User Agent applies authentication only. This is the default value.
auth-int The SIP User Agent applies authentication with integrity protection (see
RFC 2617).