Medias Mediatrix 1204, Справочное руководство

Страница: 167 / 390

Outbound Proxy Server Reference Manual (SIP Version)
Mediatrix 1204 141
Loose Router Configuration
You must specify the type of routing of the outbound proxy configured in sipOutboundProxyHost does.
X
To set the outbound proxy router status:
1. In the sipMIB , locate the sipOutboundProxyConfig variable.
The following values are available:
Standards Supported RFC 3261 – SIP: Session Initiation Protocol, section 6
RFC 2543 – SIP: Session Initiation Protocol
Loose Router
A proxy is said to be loose routing if it follows the procedures defined in the RFC 3261 specification
(section 6) for processing of the Route header field. These procedures separate the destination of the
request (present in the Request-URI) from the set of proxies that need to be visited along the way
(present in the
Route header field). A proxy compliant to these mechanisms is also known as a loose
router.
Note:
This feature is currently located under the mediatrixExperimental branch of the MIB structure. See
“MIB Structure” on page 111 for more details.
Table 88: Outbound Proxy Router Status
Value Description
looseRouter This is the most current method for SIP routing, as per RFC 3261, and
will become the standard behaviour once RFC 3261 compliance is
achieved. See
“SIP Outbound Proxy (From RFC 3261)” on page 139 for
details.
strictRouter Pre-RFC 3261, RFC 2543 compatible SIP routing.
The initial route for all SIP requests contains the home domain proxy
address (the Request-URI). Requests are directed to the outbound
proxy.
In other words, the Request-URI is constructed as usual, using the
home domain proxy and the user name, but is used in the route set. The
Request-URI is filled by the outbound proxy address.