Medias Mediatrix 1204, Справочное руководство

Страница: 35 / 390

Choosing a Suitable Installation Site Reference Manual (SIP Version)
Mediatrix 1204 9
Rack-Mounting
The Mediatrix 1204 is 5.5 cm (2.2 in.) high and fits in most standard 48.26 cm (19 in.) racks. Mediatrix
recommends to use a rack compliant EIA-310-D.
X
To rack-mount the Mediatrix 1204:
1. Disconnect all of the cables from the Mediatrix 1204.
2. Remove all of the rubber feet from the Mediatrix 1204, if applicable.
3. Place the Mediatrix 1204 right side up on a hard flat surface, with the front facing toward you.
4. Place the left mounting bracket over the mounting holes on the left side of the Mediatrix 1204.
Figure 3 illustrates the rack-mounting pieces.
Figure 3: Rack Mounting Pieces
Table 7 describes the rack-mounting pieces illustrated in Figure 3 .
The left and right mounting brackets are not identical, so be sure that you use the proper bracket.
The bracket should be perfectly aligned with the side of the Mediatrix 1204.
5. Insert the two screws in the left mounting bracket, and then tighten.
6. Repeat steps 4 and 5 for the other side of the Mediatrix 1204.
7. Insert the Mediatrix 1204 into the bracket and secure with suitable screws (not provided). Be sure
that the ventilation holes are not obstructed.
Table 7: Rack-Mounting Pieces
Item Qty. Description
A 1 Mediatrix 1204 casing
B 1 Right rack-mount bracket (already installed in Figure 3 )
C 1 Left rack-mount bracket
D 4 6 x 32 5/16 across 7/64 thick steel Hex machine screw nuts
E 4 6 x 32 UNC 1/2 steel philips binding head screws
F 4 6 bolt size split lock washers
B
C
E
F
D
A
Note:
Use the screws supplied with the mounting brackets. Damage caused to the unit by using incorrect
screws invalidates your warranty.