Medias Mediatrix 1204, Справочное руководство

Страница: 164 / 390

Chapter 9 - SIP Servers Proxy Server
138 Mediatrix 1204
3. Set how you want to define the proxy server information in the DHCP server.
Static Configuration
Use the static configuration if you are not using a DHCP server or if you want to bypass it.
X
To use static information:
1. In the ipAddressConfig folder, locate the sipServerSelectConfigSource variable (under the
ipAddressConfigSipServer group).
This variable defines whether or not the Mediatrix 1204 must get its proxy server configuration
through a DHCP server.
2. Set the sipServerSelectConfigSource variable to static .
3. Set the following variables:
Table 84: Proxy Server DHCP Information
To use a... Set...
vendor specific code The sipHomeDomainProxyDhcpSiteSpecificCode variable (under the
ipAddressConfigSipServer group) to 0 . Set the proxy server IP
address in the DHCP server inside the vendor specific sub-option
204 (hexadecimal 0xCC).
site specific code The sipHomeDomainProxyDhcpSiteSpecificCode variable (under the
ipAddressConfigSipServer group) to any value between 128 and 254.
Set the proxy server IP address in the DHCP server inside the site
specific option you have chosen (it must match the value of the
sipHomeDomainProxyDhcpSiteSpecificCode variable in the unit's
configuration).
Table 85: Proxy Server Static Information
Variable Description
sipHomeDomainProxyStatic
Host Proxy server static IP address or domain name.
Default Value : 192.168.0.10
sipHomeDomainProxyStatic
Port Proxy server static IP port number.
Note : If this variable corresponds to a domain name that is
bound to a SRV record, the port must be set to 0 for the unit
to perform DNS requests of type SRV (as per RFC 3263).
Otherwise, the unit will not use DNS SRV requests, but will
rather use only requests of type A because it does not need
to be specified which port to use.
Default Value : 0