Medias Mediatrix 1204, Справочное руководство

Страница: 124 / 390

Chapter 6 - Web Interface – Advanced STUN Configuration
98 Mediatrix 1204
5. Click Submit if you do not need to set other parameters.
STUN Configuration
STUN (Simple Traversal of UDP through NATs) is a simple client / server protocol that uses UDP packets to
discover the configuration information of NATs and firewalls between a device and the public Internet:
NAT type
NAT binding public address
NAT binding time to live
NAT (Network Address Translator) is a device that translates the IP address used within a “private” network
to a different IP address known in another “public” network. See
“NAT Traversal” on page 223 for more
details.
STUN supports a variety of existing NAT devices and does not require any additional hardware or software
upgrades on the NAT device.
The Mediatrix 1204 uses the STUN protocol to discover its NAT binding for the following three IP addresses/
ports (sockets):
Signalling protocol (SIP) IP address/port
RTP IP address/port
T.38 IP address/port
SIP Outbound Proxy
For a unit to work properly behind a firewall, it must keep a pinhole opened by sending keepalive packets
through the firewall.
The Mediatrix 1204 only sends keepalive packets to the last destination for a specific socket. When a unit is
not configured with an outbound proxy, it can send, through its SIP socket, messages to various destinations,
such as a SIP redirect server, another SIP unit, or a MWI server. If, for instance, the last SIP message was
sent to the MWI server, the Mediatrix 1204 will keep the pinhole opened for the MWI server only (sending
keepalive message to the MWI server) and won't be reacheable by other units outside the firewall.
To avoid those issues, all SIP message should come and go from the same source/destination on the public
side of the firewall, i.e., a SIP outbound proxy. Mediatrix thus recommends that you use a SIP outbound proxy.
See
“SIP Servers Configuration” on page 65 for more details.
Restrictions on the Mediatrix STUN Implementation
The Mediatrix 1204 does not currently support NAT type discovery.
The Mediatrix 1204 does not currently support STUN NAT binding time to live discovery.
The Mediatrix 1204 does not currently support the TLS security mechanism.
Due to a limitation of most routers, an RTP portal might be required in order for two units behind
the same NAT/firewall to be able to communicate with each other.
Standards Supported RFC 3489 – STUN - Simple Traversal of User Datagram Protocol (UDP)
Through Network Address Translators (NATs)