Medias Mediatrix 1204, Справочное руководство

Страница: 101 / 390

Digit Maps Reference Manual (SIP Version)
Mediatrix 1204 75
Using the # and * Characters
It may sometimes be required that users dial the “#” or “*” to make calls. This can be easily incorporated in a
digit map:
xxxxxxx#
xxxxxxx*
The “#” or “*” character could indicate users must dial the “#” or “*” character at the end of their number to
indicate it is complete. You can specify to remove the “#” or “*” found at the end of a dialed number. See
“General Parameters” on page 76 .
Using the Timer
You can configure the Timer. See “General Parameters” on page 76 for more details. It indicates that if users
have not dialed a digit for the time defined, it is likely that they have finished dialing and the Mediatrix 1204
can make the call. A digit map for this could be:
[2-9]xxxxxxT
Calls Outside the Country
If your users are making calls outside their country, it may sometimes be hard to determine exactly the number
of digits they must enter. You could devise a digit map that takes this problem into account:
001x.T
In this example, the digit map looks for a number that begins with 001, and then any number of digits after that
(x.).
Example
Table 45 on page 73 outlined various call types one could make. All these possibilities could be covered in
one digit map:
(0T|00T|[1-7]xxx|8xxxxxxx|#xxxxxxx|91xxxxxxxxxx|9011x.T)
Validating a Digit Map
The Mediatrix 1204 validates the digit map as you are entering it and it forbids any invalid value.
Note:
When making the actual call and dialing the number, the Mediatrix 1204 automatically removes the
“T” found at the end of a dialed number, if there is one (after a match). This character is for indication
purposes only.