Medias Mediatrix 1204, Справочное руководство

Страница: 36 / 390

Chapter 1 - Installation Choosing a Suitable Installation Site
10 Mediatrix 1204
8. Proceed to “Hardware Connection” on page 12 .
Wall-Mounting
A single Mediatrix 1204 can be wall-mounted.
X
To wall-mount the Mediatrix 1204:
1. Disconnect all of the cables from the Mediatrix 1204 before mounting.
2. Ensure that the wall you are using is smooth, flat, dry and sturdy. Attach a piece of plywood,
approximately 305 mm x 510 mm x 12 mm (12 inches x 20 inches x 0.5 inches) securely to the wall,
if necessary.
3. Position the wall-mounting bracket against the wall (or plywood) and ensure that one of the sides
with two screw holes faces the sides or the top (see
Figure 4 ). Do not position the side with two
screw holes downward . Mark the position of the screw holes on the wall. Drill the two holes.
Figure 4: Wall Mounting Bracket
4. Insert suitable brackets and screws (not provided) to the wall or plywood. Attach the wall-mounting
bracket to the screws to ensure that the bracket is secure.
5. Remove the wall-mounting bracket from the wall and place it right side up on a hard flat surface with
the front (the side that has two screw holes) facing toward you.
6. Remove all of the rubber feet from the Mediatrix 1204, if applicable.
7. Place the Mediatrix 1204 right side up on the wall-mounting bracket, with the front facing toward
you.
8. Place the Mediatrix 1204 screw holes on the side over the mounting holes of the wall bracket. See
Figure 5 for the location of the wall-mounting pieces.
OR