Medias Mediatrix 1204, Справочное руководство

Страница: 82 / 390

Chapter 3 - Web Interface – Management Firmware Download
56 Mediatrix 1204
X
To setup the firmware download path:
1. In the General section, select where to get the image location in the Firmware Location Provision
Source field.
You have the following choices:
2. If you set the Firmware Location Provision Source parameter to Static (see Step 1), configure the
firmware download path in the Firmware Location field.
This is the location of the “setup.inf” file that contains the list of the files to download into the
Mediatrix 1204. The “setup.inf” file and all the other files must be in the same directory. In other
words, this is the path from the root TFTP/HTTP folder down to the files extracted from the zip file.
Note that the path must contain a maximum of 63 characters.
Figure 25: Management – Firmware Download Web Page
3. If you set the Firmware Location Provision Source parameter to remoteFile (see Step 1):
a. Create a text file and write the path and/or name of the directory that contains the files required
for download. Save this file as “mediatrix1204targetimage.inf” under the server root path.
b. Configure the path of the “mediatrix1204targetimage.inf” file in the Firmware Selection File
Location field.
Note that the selection file name is in lower case. Some web servers are case sensitive. The
path must contain a maximum of 63 characters.
This is useful if you are using automatic updates with multiple units. If you want the units to
download a new version, you only have to change the path once in the
“mediatrix1204targetimage.inf” file. If you were to use the
Firmware Location field, you would
have to change the path in every unit.
4. Click Submit if you do not need to set other parameters.
Table 38: Image Location Parameters
Parameter Description
static Uses the directory specified in the Firmware Location field (see Step 2).
remoteFile The image location is defined in a file called “mediatrix1204targetimage.inf”. The
location of this file is defined in the
imageSelectionFileLocation variable.
This is useful if you are using automatic updates with multiple units (see Step 3).
3
1
2
Note:
If you leave the file empty, the Mediatrix 1204 will look for the firmware download information in the
root directory of the image server.
Note:
The current firmware server information is displayed in the Status section.