Medias Mediatrix 1204, Справочное руководство

Страница: 47 / 390

Default Settings Switch Reference Manual (SIP Version)
Mediatrix 1204 21
In this mode, SIP is deactivated. Only SNMP or HTTP can be used to set the IP addresses listed
above and the protocol-specific IP addresses (all IP addresses located under the
ipAddressConfig
folder in the MIB structure).
You can also download a software version, but you cannot download a configuration file.
6. When the Mediatrix 1204 has finished its provisioning sequence, perform the changes, and then
turn it off, plug it on the network, and turn it on again.
When restarting, the Mediatrix 1204 will not be in Recovery mode and will use the IP addresses
configuration set forth in the MIBs.
See “Changing a Parameter Value” on page 113 for more details.
Factory Reset
The Factory reset reverts the Mediatrix 1204 back to its default factory settings. It deletes the persistent MIB
values of the unit, including:
The entire mediatrixMIBs configuration.
The MIB-II setup.
The software download configuration files.
The SNMP configuration, including the SNMPv3 passwords and users.
The Factory reset creates a new configuration file with the default factory values. It should be performed with
the Mediatrix 1204 connected to a network with access to a DHCP server. If the unit cannot find a DHCP
server, it sends requests indefinitely.
You can disable the Factory reset to avoid users deleting the existing configuration. See “Disabling the Factory
Reset” on page 22 for more details.
X
To trigger the Factory Reset:
1. Insert a small, unbent paper clip into the Default Settings switch hole of the Mediatrix 1204.
Do not depress before all the LEDs stop blinking and are steadily ON.
2. Release the paper clip.
The Mediatrix 1204 restarts.
This procedure resets all variables in the MIB modules to their default value; defaults include the
localHostSelectConfigSource variable set to dhcp .
When the Mediatrix 1204 has finished its provisioning sequence, it is ready to be used with a DHCP-
provided IP address and MIB parameters.
Note:
The recovery mode does not alter any persistent configuration data of the Mediatrix 1204.
Note:
The Factory reset alters any persistent configuration data of the Mediatrix 1204.