manualshive.com logo in svg

Mec Titan Boom 60-S, Руководство оператора

Поделиться
Скачать
Mec Titan Boom 60-S Скачать руководство пользователя страница 54

Page 50

Ttan Boom

TM

 60-S - Operator’s Manual

September 2020

Transport and Lifting Instructions

Safety Information

This section is provided for reference and does not supersede any 
government or company policy regarding the loading, transport or lifting 
of MEC machinery�����

Truck drivers are responsible for loading and securing machines, and 
should be properly trained and authorized to operate MEC machinery����� 
Drivers are also responsible for selecting the correct and appropriate 
trailer according to government regulations and company policy����� Drivers 
must ensure that the vehicle and chains are strong enough to hold the 
weight of the machine (see the serial number plate for machine weight)�����

Loading

Free-wheel configuration for Winching or Towing

RUNAWAY HAZARD!

After releasing the brakes there is nothing to stop machine travel����� 
Machine will roll freely on slopes�����

ALWAYS chock the wheels before manually releasing the brakes�����

The machine can be winched or towed short distances at speeds not to exceed 5 MPH (8 km/h). 
Before towing or winching the machine, it is necessary to release the brakes. Reset the brakes after 
towing or winching.

DISENGAGED

ENGAGED

ART_2848

Disengage Brakes before Towing or Winching

Chock the wheels.
Remove the Torque Engage Cap and reinstall with the bump facing 
inward on all four (4) hubs.

Engage Brakes before Driving

Remove the Torque Engage Cap and reinstall with the bump facing 
outward on all four (4) hubs.

•
•

•

Transport and Lifting Instructions

Secton 12 - Transport and Lftng Instructons

Содержание Titan Boom 60-S

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды