manualshive.com logo in svg

Mec Titan Boom 60-S, Руководство оператора

Поделиться
Скачать
Mec Titan Boom 60-S Скачать руководство пользователя страница 26

Page 22

Ttan Boom

TM

 60-S - Operator’s Manual

September 2020

Secton 7 - Operatng Instructons & Functon Tests

Test Operation

Press and hold the Function Enable switch.
Push the switch up and down. The platform level should change accordingly.
Releasing the switch will stop platform level function.
Pressing the Emergency Stop Switch will stop platform level function.

ART_3351

Platform Rotate

Press and hold the Platform Rotate switch on the base control panel to rotate 
the platform.

Test Operation

Press and hold the Function Enable switch.
Push the switch left and right. The platform should rotate accordingly.
Releasing the switch will stop platform rotate function.
Pressing the Emergency Stop Switch will stop platform rotate function

Note:

The Platform Rotate function will stop when the platform reaches its detent center position. To 
continue to rotate the platform, return the switch to the neutral position, then push the switch 
to rotate the platform in the desired direction.

ART_3352

Platform Slide Forward/Reverse

Press and hold the Platform Slide switch on the base control panel to slide the 
platform along the platform support beam.

Test Operation

Press and hold the Function Enable switch.
Push the switch left and right. The platform should move along the platform support beam 
accordingly.
Releasing the switch will stop Platform Slide function.
Pressing the Emergency Stop Switch will stop Platform Slide function.

ART_3354

Chassis Level Switch

Use this control to manually change the level of the chassis. This function is 
disabled when the boom is elevated.

Note:

This function is performed automatically when deploying the stabilizers.

•
•
•
•

•
•
•
•

•
•

•
•

Содержание Titan Boom 60-S

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды