Page 12
Ttan Boom
TM
60-S - Operator’s Manual
September 2020
Secton 5 - Controls & Components
13
Steering Mode
Switch
Use this switch to set the steering mode:
Left position: Crab Steer -- All four wheel turn in the same direction.
Center position: 2-Wheel Steer -- Only the front two wheels steer.
Right position: 4-Wheel Steer -- The front and rear wheels steer in opposite
directions.
14
Drive/Steer Control
Lever
Depending on the placement of the control box and the orientation of the platform,
the machine may move in unexpected directions when the Drive and Steer functions
are activated. The color- and shape-coded arrows on the joystick decal correspond
to similar arrow decals on the machine chassis.
Be sure to check the arrows on the chassis before using the Drive or Steer
functions.
Drive Function
Push the control lever forward or backward to drive the machine.
Steer Function
Press the thumb switch on top of the control lever to steer left or
right.
15
Overload Indicator
Light
Light ON indicates too much weight on the platform.
An audible alarm will sound and all machine function will stop.
Remove weight from the platform to restore function and continue.
16
Tilt Indicator Light
If this red light is illuminated, the machine is not level. Carefully retract the boom,
then lower the boom, before leveling the machine, or move the machine to a firm,
level surface.
17
Low Fuel Indicator
Light
If this amber light is illuminated, the fuel level is low. Refuel soon.
18
Boom Function
Control Lever
Boom Lift/Lower
Function
Depress the enable button on top of the control lever, then pull the
joystick backward to lift the boom.
Depress the enable button on top of the control lever, then push
the joystick forward to lower the boom.
Boom Extend/
Retract Function
Depress the enable button on top of the control lever, then push
the control lever right to extend the boom.
Depress the enable button on top of the control lever, then push
the control lever left to retract the boom.
19
Platform Level
Switch
Press this switch up to manually level the rear of the platform upward.
Press this switch down to manually level the rear of the platform downward.
20
Platform Function
Control Lever
Platform Slide
Forward/
Rearward
Function
Press the enable button on top of the control lever, then push
the control lever forward to slide the platform forward along the
platform support beam.
Press the enable button on top of the control lever, then pull the
control lever backward to slide the platform rearward along the
platform support beam.
Platform Rotate
Function
Press the enable button on top of the control lever, then push the
control lever left to rotate the platform counterclockwise.
Press the enable button on top of the control lever, then push the
control lever right to rotate the platform clockwise.
The Platform Rotate function will stop when the platform reaches
its detent center position. To continue to rotate the platform, return
the joystick to the neutral position, then push the joystick to rotate
the platform in the desired direction.
