Mec Titan Boom 60-S Скачать руководство пользователя

Страница: 53 / 64

Page 49

Ttan Boom

60-S - Operator’s Manual

September 2020

Secton 11 - Warnng and Instructonal Decals

Serial Plate

Serial Plate Location

The serial plate is attached to the
machine at the time of manufacture.
Important information about the
machine is recorded on the serial
plate.

ART_4210

Serial Plate Description

MFG YEAR��

Month / Year of manufacture

MODEL NUMBER��

Identifies the machine.

SERIAL NUMBER��

Identifies a machine with reference to its original owner. Refer to the number
when requesting information or ordering parts.

MODEL YEAR��

Machine model year.

MAX�� PLATFORM CAPACITY
INCLUDING PERSONS��

The maximum safe load (material, p equipment) which can
be correctly placed on the platform at any elevation.

MAX�� PLATFORM CAPACITY
OUTSIDE LOAD ZONE��

The maximum safe load (p equipment) which can be evenly
distributed outside the load zone of the platform at any elevation.

MAX�� SIDE LOAD��

The maximum safe force that the occupant can exert laterally on an object
outside the platform.

MAX�� PLATFORM HEIGHT��

The maximum attainable height measured from level ground surface to
platform floor.

MAX�� DRIVE HEIGHT��

The maximum safe platform height at which the machine can be driven.

MAX�� WHEEL LOAD��

The maximum safe weight applied to each wheel. Calculated with all available
options installed. Fw = 30% (Wm + Wc + Wopt)

MAX�� GROUND PRESSURE��

The amount of pressure exerted on the surface at each wheel.
Calculated with all available options installed.
Pmax = 30% (Wm + Wc + Wopt) / Contact Area

STANDARD MACHINE WEIGHT��

The weight of the machine with no options.

OPTIONAL EQUIPMENT ADDS TO
STANDARD MACHINE WEIGHT��

The weight of installed optional equipment.

Содержание Titan Boom 60-S

































































Результаты поиска

Содержание Titan Boom 60-S

Отзывы:

Похожие инструкции для Titan Boom 60-S

Бренды по названию

Популярные бренды

Mec Titan Boom 60-S, Руководство оператора

Результаты поиска

Содержание Titan Boom 60-S

Отзывы:

Похожие инструкции для Titan Boom 60-S

Бренды по названию

Популярные бренды