Mec Titan Boom 60-S Скачать руководство пользователя | Manualshive

Страница: 31 / 64

background image

Page 27

Ttan Boom

TM

60-S - Operator’s Manual

September 2020

Secton 7 - Operatng Instructons & Functon Tests

ART_3363

Low Fuel Indicator Light

Light ON indicates a low-fuel alert condition.

Refuel soon.

•

ART_3529

Overload Light and Alarm

Light ON indicates too much weight on the platform.
An audible alarm will sound and all machine function will stop.
Remove weight from the platform to restore function and continue.

•
•
•

Drive Control Lever Operation

Depending on the placement of the control box and the orientation of the platform, the machine
may move in unexpected directions when the Drive and Steer functions are activated. The color-
and shape-coded arrows on the joystick decal correspond to similar arrow decals on the machine
chassis. Be sure to check the arrows on the chassis before using the Drive or Steer functions.

ART_3366

Drive Function speed is proportional and is controlled by the
positional of the control lever. The further it is moved from the
neutral (center) position, the faster the speed will be.
When the boom is elevated beyond an 8° angle or extended
beyond 8 inches (0.2 m), the maximum drive speed is reduced to
0.5 mph (0.8 km/h). Drive function speed is still fully proportional to
the position of the drive control handle.
The control lever returns to the neutral (center) position when
released.
Steering Function is not proportional.

•

•

•

•

Test Operation

Drive: Squeeze the enable trigger, then move the control lever in the desired direction of
movement. The further it is moved from the neutral (center) position, the faster the speed will
be.
Stop: Return the control lever to the neutral (center) position. Releasing the control lever will
also stop the machine.
Extend the boom approximately 3 feet (1 m), then drive the machine. Speed should be reduced
significantly from the fully-retracted, fully-lowered speed. Retract the boom.
Elevate the boom approximately 15°, then drive the machine. Speed should be reduced
significantly from the fully-retracted, fully-lowered speed. Lower the boom.
Steering: Squeeze the enable trigger, then press the thumb switch on top of the control lever to
steer in the desired direction.

•

•

•

•

•

«
...
29
30
31
32
33
...
»

Содержание Titan Boom 60-S

































































Отзывы:

Нет отзывов

Похожие инструкции для Titan Boom 60-S

Бренд: Bishamon Страницы: 7

Бренд: Skyjack Страницы: 12

120 AETJ COMPACT

Бренд: Manitou Страницы: 70

Бренд: TLS Страницы: 31

Бренд: TROMMELBERG Страницы: 32

Hy-Brid HB 1030E

Бренд: Custom Equipment Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды