Mec Titan Boom 60-S Скачать руководство пользователя | Manualshive

Страница: 44 / 64

background image

Page 40

Ttan Boom

TM

60-S - Operator’s Manual

September 2020

Secton 8 - Machne Inspectons

Frequent Inspection Checklist

This checklist must be used at 3-month intervals or every 150 hours of
machine use, whichever occurs first�� Failure to do so could result in
death or serious injury��

Frequent Maintenance Inspections should be conducted by qualified service technicians only.
Photocopy this page for reuse. Keep inspections records up to date. Record and report all
discrepancies to your supervisor.

Model Number

Serial Number

Hour Meter Reading

Initial

Description

Perform all checks listed on Pre-Start Inspection.

Replace engine oil and filter after the first 100 hours of service.

See Kubota engine operator’s manual for other engine maintenance information.

Inspect the condition of hydraulic fluid in the reservoir. Oil should be a clear amber color.

Check battery electrolyte level and connections.

Check wheel lug nuts for proper torque (see “Specifications”).

Check if tires are leaning in or out.

Inspect all structure and pivot points for signs of wear and/or damage.

Check the pin joints and retaining rings for security.

Inspect the entire machine for signs of damage, broken welds, loose bolts, improper or makeshift repairs.

Check that the platform does not drift down with a full load.

Check all wire connections for tightness and corrosion.

Check stabilizers for proper operation.

Check the operation speeds to ensure they are within specified limits (see “Specifications”).

Check the emergency lowering system.

Clean and lubricate all push button switches with dry lubricant and ensure that the switches operate
freely in all positions.

Check the tightness of the platform frame and the linkage pins.

Check the overall platform and guardrail component security.

Check the electrical mounting and hardware connections for security.

Check the steering kingpins for excessive play.

Additional maintenance requirements for severe conditions

If the machine is used in very dusty, exceptionally hot or exceptionally cold conditions, replace hydraulic
filter element (under normal conditions replace every 6 months or 300 hours, whichever comes first).

DATE

INSPECTED BY

«
...
42
43
44
45
46
...
»

Содержание Titan Boom 60-S

































































Отзывы:

Нет отзывов

Похожие инструкции для Titan Boom 60-S

Бренд: Genie Страницы: 159

Бренд: Genie Страницы: 303

Бренд: ESAB Страницы: 28

Genie Z-34/22DC

Бренд: Terex Страницы: 188

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды