Page 39
Ttan Boom
TM
60-S - Operator’s Manual
September 2020
Secton 8 - Machne Inspectons
Pre-Start Inspection Checklist
The operator must conduct a Pre-Start Inspection of the machine before each work shift.
DO NOT use a damaged or malfunctioning machine.
Initial
Description
Check that the operator’s manual and manual of responsibilities are in the storage container located on
the platform.
Perform a visual inspection of all machine components. Look for missing parts; torn or loose hoses;
hydraulic fluid leaks; loose, torn or disconnected wires; damaged tires; etc.
Check all structural components of the machine for cracked welds, corrosion and collision damage.
Check the security and condition of the lanyard attachment cables and end connections. Wire ropes
should not have any damage, such as cut or frayed strands.
Check all hoses and the cables for worn or chafed areas.
Check the platform rails and sliding mid-rail entry for damage or modification. Check for missing spring
pin retainers.
Check that all warning and instructional decals are legible and secure.
Check the tires for damage.
All structural components, pins and fasteners are present and properly tightened.
Check for fluid leaks.
Check hydraulic fluid level (check with platform fully lowered and stabilizers fully retracted).
Check engine oil level.
Check engine coolant level at overflow bottle.
Check fuel tank level.
Secure all covers, panels and guard rails.
Ensure that all gates are properly closed and secured before operating the machine.
