manualshive.com logo in svg

Mec Titan Boom 60-S, Руководство оператора

Поделиться
Скачать
Mec Titan Boom 60-S Скачать руководство пользователя страница 32

Page 28

Ttan Boom

TM

 60-S - Operator’s Manual

September 2020

Secton 7 - Operatng Instructons & Functon Tests

ART_3362

Steering Mode

Three steering modes are available: Crab Steer, 2-Wheel Steer and 4-Wheel 
Steer.

To return to 2-Wheel steering after using the Crab Steer or 4-Wheel Steer 
modes, center the rear wheels, then switch to 2-wheel steer mode.

Test Operation

Set Steering mode to the left position: Crab Steer. Squeeze the enable trigger, then press the 
thumb switch on top of the control lever. All four wheels should turn in the same direction. Return 
the wheels to the centered position.
Set Steering mode to the center position: 2-Wheel Steer. Squeeze the enable trigger, then press 
the thumb switch on top of the control lever. Only the front two wheels should turn. Return the 
wheels to the centered position.
Set Steering mode to the right position: 4-Wheel Steer. Squeeze the enable trigger, then press 
the thumb switch on top of the control lever. The front and rear wheels should turn in opposite 
directions. Return the wheels to the centered position.

ART_4305

Boom & Platform Functions

The Stabilizer Deploy/Retract Switch operates the stabilizer arms at both 
the front and rear of the machine�����

Before using the Stabilizer Deploy/Retract Switch, visually check that the 
area around each stabilizer is clear of personnel and material�����

ART_4306

Stabilizer Deploy/Retract

Press and hold the Stabilizer Deploy/Retract switch to deploy the stabilizers. 
Continue to hold the switch down until the stabilizers automatically stop and 
the green indicator light illuminates.

Note:

Stabilizer deployment first automatically levels the frame, then deploys the stabilizers.

Note:

Be sure the stabilizers are fully retracted before driving.

Test Operation

Press and hold the Function Enable button.
Continue to hold switch down until stabilizer deployment stops.
The green Stabilizers Set indicator light will illuminate on the Platform Control box when the 
stabilizers are fully deployed. This indicates that full boom extension is enabled.
Releasing the button will stop deployment.

•

•

•

•
•
•

•

Содержание Titan Boom 60-S

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды