MDT Technologies SCN-IP000.03 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 57

background image

Technical Manual – IP Router SCN-IP100.03

MDT technologies GmbH •

51766 Engelskirchen • Papiermühle 1

Tel.: +49-2263-

880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de

5

5

2 Overview

The MDT IP Router, SCN IP100.03, has 2 parallel applications.
On the one hand there is the application for the IP Router which allows access to the bus via Ethernet.
The second application is on the TP side and can send by KNX triggered emails, serve as a time server
and provides access to the device via a Web Interface.

Important: As these are 2 different applications, both applications must be programmed
independently. The IP Router must get 2 physical addresses!

Specifics:



Use as a time server



Extensive email functionality with status information from the KNX bus



Supplied completely from the KNX bus, no additional power supply required!



IP Secure for Interface application



Data Secure for the email application

2.1 Possible applications IP-Router

The MDT IP Router connects the KNX bus with an Ethernet network. Through the network, KNX
telegrams can be sent to other devices or received from. For communication, the device uses the
KNXnet / IP protocol of the KNX Association. It thus operates as a programming interface and
replaces a RS232 or USB interface.
The IP Router includes apart from the tunneling function for point-to-point connection additionally
the function of a line coupler (routing). This allows the IP Router to send/receive telegrams
throughout the network to/from other lines and areas.
The power is supplied via the KNX bus.

Please note

: Only the group monitor is supported in the ETS, not the bus monitor.

The bus monitor requires an IP interface or a USB interface.

The IP router protocol does not support the bus monitor according to KNX specification.

2.2 Possible applications E-Mail Client

The email client can emit status reports, bit alarms and text alarms. All email events can be triggered
via KNX telegrams. In addition, status reports can also be sent at fixed times - the email client has the
functionality to work as a clock-master. All e-mails can be sent to up to 3 addresses simultaneously.
The settings of the e-mail functionality can be carried out comfortably via the web interface.

2.3 Possible applications Timeserver

The IP Router receives the date and time of the NTP server and can distribute them as the "master"
to further KNX devices via the bus.

«
...
3
4
5
6
7
...
»

Содержание SCN-IP000.03


























































Отзывы:

Нет отзывов

Похожие инструкции для SCN-IP000.03

Бренд: N-Tron Страницы: 62

Бренд: Konica Minolta Страницы: 38

Бренд: Western Digital Страницы: 8

Бренд: Intellinet Страницы: 2

Бренд: Radicom Страницы: 27

Бренд: B&B Electronics Страницы: 2

SecPath F50X0 Series

Бренд: H3C Страницы: 41

OmniTik UPA-5HnD

Бренд: RouterBOARD Страницы: 4

VDA-NVR2108W4KS2

Бренд: Dahua Technology Страницы: 363

Бренд: Orcomm Страницы: 10

Бренд: Epson Страницы: 71

Бренд: Epson Страницы: 29

Бренд: Epson Страницы: 57

C823312 (Ethernet)

Бренд: Epson Страницы: 76

2 Channel Inductor Module CLX-2IND

Бренд: Crestron Страницы: 1

Бренд: Billion Страницы: 147

CloudVision DCA-CV-100

Бренд: Arista Страницы: 46

Бренд: D-Link Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды