Technical Manual – IP Router SCN-IP100.03
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
12
12
2.8.3 Mixed use
The following figure shows the IP router as area coupler (IP Router 1.0.0.) and line coupler
(IP Router 2.1.0):
Figure 4: IP Router as area- and line coupler
Is it within a KNX system needed to use the IP Router at one location e.g. an Office as an area coupler
and elsewhere, e.g. a distant building as a line coupler, so two different IP Routers can assume this
function.
It needs to be noted that the IP Router as a line coupler gets the physical address from an open area,
such as shown in picture above 2.1.0.
The IP router as an area coupler (1.0.0) can get further lines subordinated
