DataLogger Operation
Joint Report:
After the fusion joint is complete, the joint report will display. The report will show information about the fusion joint with a table of
fusion parameters and the actual recorded values for those parameters.
Store the joint report by touching the Fusion Joint Report Storage button.
If you receive this message box, you do not have a USB device connected. Ensure you
have a valid USB device connected to the HMI and touch the Fusion Joint Report Storage
button again.
If you receive this message box, the joint report was not stored correctly.
If you receive this message box, the credentials used to log into
DataLogger Vault
4 - 13
Operation
PH05
49
7-0
4-1
5-1
6
PH05500-0
4-1
5-1
6
PH05
499-0
4-1
5-1
6
PH05
49
8-0
4-1
5-1
6
