Special Operation - Stub Ends
6 - 7
Configure Machine for Stub End Fusion
Attach the 3 over clamp plates loosely.
Adjust the alignment bolts and roughly center the stub end.
Tighten the over clamp plates.
Load pipe into the carriage.
Confirm the alignment between the stub end and the pipe.
Make adjustments to the alignment if needed and reconfirm the
alignment.
Perform a fusion of the stub end and pipe using the appropriate
fusion standard.
TX05407-06-11-20
CD02
11
6-1
0-2
3-1
7
CD02
11
7-1
0-2
3-1
7
CD02
11
2-1
0-2
3-1
7
