Facer Cutters
The facer cutters have cutting inserts with 4 cutting surfaces.
Inspect the cutting inserts daily for dull or damaged inserts.
Rotate the cutting inserts to a new cutting surface as needed.
TX04971-04-11-16
Clean Jaws and Inserts
To prevent slippage and insure proper alignment, the jaws and inserts must
be clean.
Clean the jaws and inserts of any dirt or residual material using a stiff-
bristled brush.
TX00433-9-15-94
9 - 4
Maintenance
Clean Heater Surfaces
The heater faces must be kept clean and free of any plastic build up or
contamination.
Before each fusion joint the heater surfaces must be wiped with a clean,
non-synthetic cloth.
NOTICE:
Do not use an abrasive pad or steel wool. Use a non-synthetic
cloth that won’t damage surfaces.
Refer to Prepare Heater in the Operation section of this manual for
instructions for cleaning the heater.
TX04970-04-11-16
CD0
158
7-0
4-1
1-1
6
CD0
130
4-0
4-1
1-1
6
CD0
12
83-0
4-1
1-1
6
Grease
NOTICE:
Use only Mobil Mobilith SHC 100 grease to lubricate parts
throughout the machine. Other greases will damage parts on the machine.
Keep moving parts well lubricated as needed.
TX04972-04-11-16
CD00
183-1
1-6-9
5
