9 - 1
Maintenance
Washing the Machine
An important factor in the service life of this machine is cleanliness. The
machine should be cleaned with soap and water as needed.
When exposed to dust and mud in a field location, the machine should be
washed at the end of each days work.
Power washing the machine is not recommend.
TX04964-04-11-16
Check Hydraulic Fluid
The hydraulic fluid level should be checked during work-site commission or if a leak
is found.
The level should be checked with cold fluid and with all cylinders fully retracted
including elevation and clamping. The quarter jaws will need to be removed in
order to lower the machine to lowest position and retract the quarter jaw cylinders
fully.
If hydraulic fluid is not visible in the sight gauge, fluid must be added.
Fill to the top of the sight gauge when the oil is cool.
Ensure fluid is clear with no air bubbles present.
Refer to the "Hydraulic Fluids" section of this manual for hydraulic oil
recommendations.
TX04965-04-11-16
Preventative Maintenance
The machine must be kept clean and well maintained.
With reasonable care, this machine will give years of service. Therefore, it is
important that a regular schedule of preventive maintenance be kept.
Service intervals are approximate for average service and may need to
be done more frequently in severe service conditions or can be done less
frequently if used minimally.
Store machine inside, out of the weather, whenever possible.
CD00
14
2-1
1-2-9
4
CD00
17
8-5-3-9
6
CD0
13
24-0
4-1
1-1
6
TX04962-04-11-16
Disconnect Electrical Power
Always disconnect unit from electrical power source
before beginning any maintenance to avoid the risk of
electric shock
De-energize the machine by turning the battery switch to disconnected.
TX04963-04-11-16
WR00055-4-7-9
3
¡ADVERTENCIA!
