Transport Talon
7 - 1
Transport Talon
The Talon must be disassembled and set into a shipping configuration
before transportation.
Å
Set the facer to the home position and raise the heater up to the end of
travel. Move the indexer right to the end of travel.
Remove Quarter Jaws:
The quarter jaws must be removed before shipping.
Å
Raise the machine up using the
Machine Elevation
button on the
Machine Controls
screen.
Å
Close all four sets of jaws so the lower jaw pivot is in the proper position for
quarter jaw removal.
Å
Shut down the machine.
Å
Remove the two bolts and washers that secure the quarter jaw to the
lower jaw pivot.
Å
Lift the quarter jaw using two people and rotate the jaw up on the pivot
Å
Lift the jaw up and away from the lower jaw pivot.
Å
Repeat these steps to remove all other quarter jaws on the carriage.
CD0
12
84-0
4-1
5-1
6
CD0
13
17-0
4-1
5-1
6
CD0
13
18-0
4-1
5-1
6
