9 - 7
Maintenance
Heater/Facer Chain Tension
The chains for the elevation of the heater and facer are kept tight with the
use of tensioners.
If the chains experience a loss or major increase in tension, an alarm will
be displayed.
A tension alarm could be triggered due to:
• Heater/Facer obstruction
• Debris on tensioner sensors
• Sensor/cable failure
Correct the problem and then reset the alarm.
TX04978-04-11-16
Pump Drive
Check the pump drive oil level with the dipstick (
A
) while the engine is off.
Ensure the oil level is to the MAX oil level on the dipstick.
It is recommended to change oil after the first 500 hours or 3 months of
service, which ever occurs first. Under normal operating conditions, it is
recommends that the oil be changed every 1000 hours or 6 months of
service.
The drain plug (B) is located on the bottom of the pump drive.
Inspect and clean magnetic drain plug for contamination or metal particles
before replacing.
Recommended Oil Lubricant Grade:
• Below -10°F
Mobile SHC 630 Synthetic or equivalent
• -10°F to 100°F
80w-90 or EP90 (APL-GL-5)
• Above 100°F
Mobile SHC 630 Synthetic or equivalent
TX04977-04-11-16
CD0
16
15-0
4-1
1-1
6
CD0
16
15-0
4-1
1-1
6
CD0
16
16-0
4-1
1-1
6
Pump Drive Dipstick
Pump Drive Drain Plug
