MBM FC 10 PLUS, Руководство по эксплуатации

Страница: 19 / 40

18
4.2 Setting paper feed pressure
- Position the paper feed pressure shift lever at [2] for
normal jobs (ordinary paper).
- Four different degrees of pressure can be selected for
Stations 1 and 10.
- Three different degrees of pressure can be selected for
Stations 2 to 9.
- Select [1] (weak) when double feed occurs.
- Select [3] (strong) when paper feed slip occurs.
4.3 Setting separator pressure
-
For regular jobs processing ordinary paper, set
the separator pressure shift lever at [2]. Remove
the paper feed table when changing separator
pressure.
- Three different degrees of pressure can be
selected for all stations.
- Select [1] (weak) when paper feed slip occurs.
- Select [3] (strong) when double feed occurs.
* While separator pressure is classified as [1],
[2] and [3] on the collator display, for special
cases, [4] is built in next to [3]. Use this when
double feed is so frequent that [3] cannot
prevent it.