MBM FC 10 PLUS, Руководство по эксплуатации

Страница: 14 / 40

13
№
Name Function
①
Station Green lamp
Shows the collating status of each station 1 through 10
Station Red lamp
Flashes red in the event of jam or double feed.
②
DOOR lamp
Lights up when the back door is open.
③
④
Shows direction of paper ejection when lighted green.
⑤
ERROR (L) lamp Indicates an error in the left side option when lighted red.
⑥
⑦
SHEET SET
Press the key to change the number of collated sets and the number of
batches in Insert and Programmed Insert modes.
⑧
COUNTER
Displays the number of collated sheets.
“Err” is displayed in the event of an error.
⑨
INSERT/7 key
When lighted green, Insert mode is selected.
Also used to display 7 on the counter.
⑩
STAPLE/1 key
When lighted green, staple processing will occur; when not lit, stapling will not occur.
Also used to display 1 on the counter.
⑪
PROGRAM/8 key
When lighted green, Programmed insert mode is selected.
Also used to display 8 on the counter.
⑫
PUNCH/2 key
When lighted green, paper will be punched; when not lit, no punching will occur.
Also used to display 2 on the counter.
⑬
REPEAT/9 key
When lighted green, Crisscross stacker continuously moves each time pre-programmed
number of collated sets are ejected.
Also used to display 9 on the counter.
⑭
SPEED/3 key
When lighted green, high-speed collation occurs; when not lit, collation will be slow.
Also used to display 3 on the counter.
⑮
0 key
Used to set the counter to O.
⑯
ALTERNATE/4 key
When lighted green, Alternate mode is selected; when not lit, Normal mode is selected.
Also used to display 4 on the counter.
⑰
C key
Press to return the counter to zero.
It also turns off the lamp.10
⑱
CRISS-CROSS/5 key
When lighted green, Crisscross mode is selected; when not lit, straight mode is selected.
Also used to display 5 on the counter.
⑲
START/STOP key Press to start or stop collator operation.
⑳
6 key Used to display 6 on the counter.
㉑
OPTION lamp
When connecting a option, it lights up.
㉒
MODE key
When lighted green, various functions can be programmed.
When using function keys, press this key first to light it green
(goes out after five seconds).
㉓
CHECK key
Press for trial paper feed so the machine will memorize stations to be used and the
thickness of paper.
㉔
RESET key
Press to reset error.
When pressed for three seconds, the paper feed table lowers. Pressed for three seconds
while the machine is in stand-by mode, the main motor will idle.
㉕
EJECT lamp
Lights should a paper ejection jam occur
㉖
FULL lamp
Lights should a paper stacking table is full.
㉗
ERROR(R) lamp
Indicates an error in the right side collator when lighted red.
㉘
EMPTY FEED
lamp
NO PAPER
Flashes green in the event of no paper or no feed.
In case of no paper, the lamp for the relevant station blinks slowly.
If empty feed, the lamp for the relevant station blinks quickly.
㉙
DOUBLE FEED lamp Flashes red should double feed occur.
㉚
PAPER JAM lamp Lights red should a paper jam occur.
㉛
CHECK lamp Lights green to when trial feed is complete.