MBM FC 10 PLUS Скачать руководство пользователя

Страница: 20 / 40

5. OPERATIONS

5.1. Procedure and method

5.1.1 Activating power

Turn the power switch on.

Remarks

Before turning the power switch to ON, make sure

that the paper feed, auxiliary and stacking tables are

fully inserted.

5.1.2 Setting of paper on feed tables

(1) Load paper on the paper feed tables and hold it firmly

using the lateral paper guides.

Note

[How to fan out sheets]

①

Pinch the sheets of paper at both ends.

②

Bend them to admit air.

(Loosen the force lightly and pinch them again after

bending)

③

Jog and align the sheets vertically.

Remarks

a) Use the fill line on the paper guide as the loading capacity. In case of printed paper, do not load too

much as it tends to swell.

b) Fan out sheets well and then load them on the feed table. Failure to properly fan sheets may lead to

trouble.

c) Align sheets at the edges and insert them until they lightly strike the forward guide. Failure to

properly align sheets may lead to double feed or no feed.

d) Make sure any ink on the paper is dry. Let ink dry before loading paper. Wet ink soils the feed rollers

and can lead to malfunction, such as double feed or no feed.

e) Copied sheets may cause wrong feed or stacking error owing to electrostatic charge. Static electricity

can be controlled by spraying a retail static eliminator on the feed rollers and the front edge of the

paper. Too, since copied sheets are apt to curl at the edges; straighten or invert them before feed table

f) Be sure to load no-carbon-required paper (general quality) with the color developing side (usually the

print side) down, otherwise the side coated with color former will probably be marked with rubbed

traces when contacting the feed roller.

g) Front and back sides of ejected paper change according to ejected direction (with independent use or

when connected). Be very careful when connecting with after processing equipment.

Power Switch

Содержание FC 10 PLUS









































Результаты поиска

Содержание FC 10 PLUS

Отзывы:

Похожие инструкции для FC 10 PLUS

Бренды по названию

Популярные бренды

MBM FC 10 PLUS, Руководство по эксплуатации

Результаты поиска

Содержание FC 10 PLUS

Отзывы:

Похожие инструкции для FC 10 PLUS

Бренды по названию

Популярные бренды