MBM FC 10 PLUS, Руководство по эксплуатации

Страница: 28 / 40

27
5.8 Storing Insert/Programmed Insert mode data
Up to four memories, Insert and Programmed Insert mode
data can be stored.
(1) Select Program mode by pressing the MODE key.
( MODE lamp will light)
(2) Press the MODE key for three seconds; memory code
[AbCd] will be displayed.
- A flashing letter means that that letter is not stored
in memory.
- A lit letter means that that letter is already stored in
memory.
The content of Insert or Programmed Insert mode
data cannot be checked directly from this; it should
be checked by calling up the data, as explained in
5.9 “Calling up Insert/Programmed Insert mode
data.
(3) Press the key responding to A to d for three seconds
and memorize or overwrite the data.
Memory code A to d responds to the following keys:
- Memory code A: Key 1
- Memory code b: Key 2
- Memory code C: Key 3
- Memory code d: Key 4
To return back to the normal collation mode, press
the RESET key.