MBM FC 10 PLUS Скачать руководство пользователя

Страница: 37 / 40

7.3. In case of breakdown

Should the collator need repair, contact your dealer (or the maintenance and service company).

8. RELOCATION OR DISPOSAL

8.1 Relocation

8.1.1 Removal of the machine from its present location

Before removing the machine from its present location, be sure to remove the power plug from the wall

outlet.

8.1.2 Transport

(1) Transport the removed parts, attachments and Operation Manual together with the machine.

(2) Take care not to expose the collator to strong vibration or shock.

8.1.3 Installation

When relocating the device (whether the device is used alone or in combination with any option), consult the your dealer

or authorized service representative.

8.2 Disposal

When disposing of the collator, ask a contractor specialized in industrial waste disposal to handle it in

accordance to the local regulations.

Содержание FC 10 PLUS









































Результаты поиска

Содержание FC 10 PLUS

Отзывы:

Похожие инструкции для FC 10 PLUS

Бренды по названию

Популярные бренды

MBM FC 10 PLUS, Руководство по эксплуатации

Результаты поиска

Содержание FC 10 PLUS

Отзывы:

Похожие инструкции для FC 10 PLUS

Бренды по названию

Популярные бренды