MBM FC 10 PLUS, Руководство по эксплуатации

Страница: 23 / 40

22
5.2 Counter
5.2.1 Using adding mode
Normally, the counter operates in adding mode. Press
the START /STOP key to start collating and the
machine will stop after all collated sheets are
delivered.
The counter displays the number of collated sets and
it will automatically stop when its displayed figure
becomes [9999]. Press the START /STOP key to
continue collating, and the counter will display [0]
and resume counting in adding mode.
5.2.2 Using subtracting mode
Set the number of sets to be collated by pressing
numerical keys.
If the number of sets is set by pressing numerical
keys, the subtracting mode lamp will automatically
light up.
The counter will automatically stop when its
displayed figure becomes [0].
If the START /STOP key is pressed while the
machine is in operation, the machine will stop and
the counter will show the number of sets remaining
to be collated.
5.3 Setting collation speed
Collating speed can be set according to paper size and
quality.
With the power on, it is automatically set for high
speed.
(1) Select function mode by pressing the MODE key.
( MODE lamp will light).
(2) Press the SPEED/3 key to change speed. Each
time the MODE key and SPEED/3 key are pressed,
speed switches between high and low speed.
(High speed: SPEED/3 lamp lights;
low speed: SPEED/3 lamp not lit.)
Remarks
When revising collating speed, be sure to press the START/STOP key after pressing the
CHECK key. The collator will not restart unless the paper is checked again.
Note
If paper is improperly set on the stacking table, select low speed for proper stacking.
As for setting of processing speed, the speed applied at the time when the power supply
is cut off is stored in it, the machine will start operation based on that speed the next
time it will be used.
Subtracting
mode lamp
Numeric key