Mazda 2009 RX-8, Особенности сервиса

Страница: 137 / 299

ON-BOARD DIAGNOSTIC [DYNAMIC STABILITY CONTROL (DSC)]
04-02–7
04-02
*1
: If the ignition voltage returns to normal, the light turns off.
*2
: If the ignition voltage is less than 7.6 V , the light illuminates. Afterwards, if the ignition voltage returns to
normal, the light turns off.
*3
: If the ignition voltage returns to normal, control is enabled.
*4
: If the ignition voltage is less than 7.6 V , control is disabled. Afterwards, if the ignition voltage returns to
normal, control is enabled.
*5
: If an error is detected during the ABS/TCS control, the light illuminates after finishing the control.
*6
: If an error is detected during the ABS/TCS control, the control is disabled after finishing the control.
*7
: If the configuration data is not within the specification, the light flashes.
*8
: If an error is detected during the TCS control, the control is disabled after finishing the control.
*9
: If an error is detected during the ABS control, the control is disabled after finishing the control.
*10
: If an abnormal cornering direction is detected, the light does not illuminate.
*11
: If an abnormal cornering direction is detected during the ABS control, the control is disabled after finishing the
control.
*12
: If an abnormal cornering direction is detected, the control is not disabled.
*13
: When an abnormal cornering direction is detected, the light turns off if the normal condition is verified the next
time the system is activated.
*14
: When an abnormal cornering direction is detected, control is enabled if the normal condition is verified the next
time the system is activated.
*15
: If the system returns to normal, the light turns off. However, if another error is detected within 180 s , the light
remains illuminated until the ignition switch is turned off.
*16
: If the system returns to normal, control is enabled. However, if another error is detected within 180 s , control is
disabled until the ignition switch is turned off.
*17
: If an error is detected during the ABS control, the light illuminates after finishing the control.
End Of Sie
Steering
angle
sensor
(abnormal
initialization)
system
C1306
Not
illuminated
Not
illuminated
Illuminated Flash
Control
enabled
Control
enabled
Control
disabled
*8
Control
disabled
*8
Control
disabled
DSC control
system
C1994 Illuminated
Not
illuminated
Illuminated
Not
illuminated
Control
disabled
Control
enabled
Control
disabled
Control
disabled
Control
disabled
CAN
communicati
on system
U0073
Not
illuminated
Not
illuminated
Illuminated
Not
illuminated
Control
enabled
Control
enabled
Control
disabled
Control
disabled
Control
disabled
U0100
U0101
U0155
U1900
U2023
CAN2
communicati
on system
U0074
Not
illuminated
Not
illuminated
Illuminated
Not
illuminated
Control
enabled
Control
enabled
Control
disabled
*8
Control
disabled
*8
Control
disabled
U0123
U1901
Malfunction
location
DTC
number
Fail-safe function
Warning light illumination status Control status
Mazda
Modular
Diagnostic
System
(M-MDS)
display
ABS
warning
light
Brake
system
warning
light
(when
parking
brake is
released)
DSC
indicator
light
DSC OFF
light
ABS
control
EBD
control
TCS control
DSC
control
Brake
control
Engine
control